10-17-2023 11:55 AM - edited 10-17-2023 12:10 PM
Hello.
I'm at the very end of inserting NetFlow config on Catalyst 9300 switchstack. I'm using successful template of routers.
Below errors intuitively make sense, because these are switchports, and they may need to be layer 3 ports (?)...
---
#sh ver
Cisco IOS XE Software, Version 17.09.04
Cisco IOS Software [Cupertino], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 17.9.4, RELEASE SOFTWARE (fc5)
---
CAT-9300-stack# int vlan77
CAT-9300-stack(config-if)# ip flow monitor MONITOR-1 input
% Flow Monitor: Failed to add monitor to interface: Invalid set of fields in monitor record for wired interface
CAT-9300-stack# int g7/7/7
CAT-9300-stack(config-if)# Ip flow monitor MONITOR-1 input
% Flow Monitor: Failed to add monitor to interface: Invalid set of fields in monitor record for wired interface
4#sh flow monitor
Flow Monitor MONITOR-1:
Description: User defined
Flow Record: RECORD-1
Flow Exporter: EXPORTER-1
Cache:
Type: normal (Platform cache)
Status: not allocated
Size: 10000 entries
---
OK then, what must I do to successfully finish this NetFlow config?
Thank you!
Solved! Go to Solution.
10-17-2023 12:00 PM
Hello @jmaxwellUSAF,
You need to configure:
- flow record
- flow exporter
- flow monitor
- flow sampler (optional)
https://www.plixer.com/blog/cisco-catalyst-9300-netflow-configuration/
10-17-2023 12:00 PM
Hello @jmaxwellUSAF,
You need to configure:
- flow record
- flow exporter
- flow monitor
- flow sampler (optional)
https://www.plixer.com/blog/cisco-catalyst-9300-netflow-configuration/
10-17-2023 12:39 PM
Im making progress...
---
QUESTION: "match flow cts {source | destination } group-tag" -- Is this line necessary?
Thank you.
10-17-2023 09:43 PM
If you're not utilizing Cisco TrustSec and if you don't need to match flows based on CTS group tags, then you can omit this line from the configuration.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide