11-25-2018 01:44 PM
Hi friends,
I would like to know, how to configure NETCONF in routers and switches cisco? Is there a procedure?
With which Cisco devices can NETCONF be used? Is there a list of devices that accepts it?
Best regards,
11-25-2018 01:54 PM
You can start from here :
11-26-2018 08:05 AM
This is legacy NETCONF. I would strongly recommend not using it unless you absolutely cannot use YANG-based NETCONF on the newer platforms.
11-26-2018 08:04 AM
Cisco devices now support YANG-based NETCONF, which is where the overall industry is heading. While legacy NETCONF has been around since IOS 12.4, the new YANG requires 16.x for IOS-XE (no legacy IOS support), and is also available in IOS-XR and NX-OS.
See https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/configuring_yang_datamodel.html as a starting point for data-model-based NETCONF. There are also a number of labs on DevNet to help get you comfortable with this. For example, have a look at https://learninglabs.cisco.com/labs/tags/NETCONF .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide