Dear Sir,
I have 2 CISCO ISR 4351 at my office. I try to configure netflow monitoring but it doesn't work.
What should I do?
This is my information;
Netflow Analyzer by ManageEngine version 11.0.0
flow record test
match flow direction
!
!
flow exporter test
destination 192.168.2.101
source GigabitEthernet0/0/1
transport udp 9996
!
!
flow monitor test
exporter test
record test
!
!
interface GigabitEthernet0/0/1
description ((LAN to Switch))
ip address 192.168.0.3 255.255.255.248
ip flow monitor test input
R4351#sh ver
Cisco IOS XE Software, Version 03.13.02.S - Extended Support Release
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(3)S2, RELEASE SOFTWARE (fc3)
Thank you.
