How to derive VPN information of MPLS VPN configured using route-maps?

[suresh.rukmangathan]

1) How to derive the VPN information of the MPLS VPN configured using route-maps?

2) Is there any MIB to get the same?

It should be noted here that if the MPLS VPN is configured using route targets, the VPN information derivation is fairly straight forward throught MplsVpn MIB.

Thanks,

Suresh R

[beth-martin]

see if the following link provides some help :

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00804420b1.html

[suresh.rukmangathan]

I have already checked the MPLS VPN MIB. This MIB does not give information that can be used to tie together to get the VPNs configured using the route-maps. This is the basic problem.