How to find minimum LMS release / patch to use starting a given equipements

[karim.guedider]

Hello,

I'am looking for a way to find the correct (and minimum) LMS version to use starting a given equipement.

Objective is to know if my customer can still use it's current LMS release + patch or change to next major LMS version

I browsed tons of cisco documentation without finding a clear information

if someone can help !

Regards,

[Svetlana Radzevich]

Hi Karim,

You should have a look at "Supported Devices Table for" and then version of your LMS server.

For instance, LMS 4.1 - http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html

Best regards,

Svetana

[karim.guedider]

Hello Svetlana,

I did not have this link .

I'am not very familliar with cisco products but if i look at this link (LMS 3.2) : http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html#3.2table

and take the  Cisco Catalyst WS-C6506 Switch  for the sample, you will see that it does not appears in the LMS 3.2 matrix, but in the  table 8 (switches) of LMS 3.0 section

What should be considered ? supported or not with LMS 3.2 ?

Thanks,

[Svetlana Radzevich]

To verify support, you should know the sysobject id.

First run snmpwalk with oid=.1.3.6.1.2.1.1.2 - this will give you the valuu, then you could verify support of this device in the table.

Svetlana

[karim.guedider]

ok, sysoid is 1.3.6.1.4.1.9.5.45. It  does not appear in the LMS 3.2 table, but it is in the LMS 3.0

should i consider that it is supported by LMS 3.2 ( is cisco product retro-compatible ? )

[Svetlana Radzevich]

If you check "Supported Device Table for LMS 3.2" -

http://www.cisco.com/en/US/partner/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html you will see that device with oid=1.3.6.1.4.1.9.5.45  is supported in LMS 3.2

Svetlana

[karim.guedider]

hum .... , can you send me this document i have no partner acces yet ?

[karim.guedider]

ok it should the one i use