How to recovery password on cisco nexus 3k

[Gerardo Gzz]

Friends

I want to recover the admin password and i follow the procedure of recovery password but the keys for break the boot process doesnt works.

There are the keys that i was using 

CTRL ]  ,, CTR L ,  CTR C , ESC

I need to reach the boot loader prompt for change the admin password

Thanks in advance

[MHM Cisco World]

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/password_recovery/b_nx_os_pwr/nx_os_pw.html

can you follow this guide, please write in which step you stop if you failed.

[Gerardo Gzz]

Hello Friends i cant break the boot of the switch i follow the procedure in the power cycling step 1 i try with CTRL ] but i cant stop the boot and enter to the boot loader prompt and change the password 

[marce1000]

                                    - Your actions are not detailed enough described , check https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/password_recovery/b_nx_os_pwr/nx_os_pw.html#47798 ,  you can for instance only use CTRL ]  on switch login: prompt. Provide screenshots or console logs of what is being tried and what is happening before that (too).

 M.

[MHM Cisco World]

from doc. I share 
"If you are using a non-U.S. keymap, the key sequence that you need to press to generate the break sequence may not work. In this case, we recommend that you set your terminal to a U.S. keymap. You can enter Ctrl-C instead of Ctrl-] (right square bracket) due to keyboard mapping."