07-14-2012 11:51 PM
Dear boss
I am using cisco (C3845-ADVIPSERVICESK9-M), Version 12.4(11). some static nat is configured. Now i want to remove all nat and configure again.
i am using router# clear ip nat translation *
router (conf) # no ip nat .......... but no enty is beign delating.
How to detate all nat or single nat ????????
shahid
07-15-2012 02:07 AM
To remove old NAT settings on Cisco router you need to
1)Clear all old NAT translations
router#clear ip nat translatiom *
2)Disable old NAT pool settings
router(config)#no ip nat pool public_access 200.100.10.33 netmask 255.255.255.252
3)And finally, disable the translation:
router(config)#no ip nat inside source list 1 pool public_access overload
From this point you can safely configure the new NAT settings.
or use this link:
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094422.shtml
Cheers.
07-15-2012 02:19 AM
Mr. sandeep
My nat is: ip nat inside source static 0.0.0.0 0.0.0.0
i did : router # no ip nat translation *
router(conf) # no ip nat inside source static 0.0.0.0 0.0.0.0
router ( conf-in)# no ip nat outside
but nat is not deleting. i alos reboot the router.
Still nat exist. what can i do now ????
Shahid
07-15-2012 02:20 AM
have you deleteed the ip nat inside or outside from the interface configs????
Regards
07-15-2012 02:26 AM
mr. sandeep
yes. i deleted ip nat inside or outside from all interface and tunnel
shahid
07-15-2012 02:45 AM
HI Shahid,
read this article....
it should resolve your problem:
Regards
05-31-2017 12:17 PM
1st Q: when you did the "no ip nat...." did you do a "sh run | i nat" to see if the command took?
2nd Q: when you reboot the rtr, did you save config or no?
05-31-2017 12:19 PM
I guess I should check dates on topics to see when they were posted. 5 years ago... this should have been resolved by now. LOL!!! Sorry, 1st and 2nd post from a newB on this forum.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide