Hi,
i have configured the Cisco ACS 4.1 server, my switch is getting authenticated via Cicso ACS, now i could able to see the failed & passed authentication with the IP address from which i logged in, but when i see the "Logged in users" it shows 0, so any setting i need to make in my switch or else the ACS?
aaa new-model
aaa authentication login default group radius enable
aaa authentication enable default enable
aaa authentication ppp default group radius
aaa authorization network default group radius
aaa accounting send stop-record authentication failure
radius-server host 10.203.1.92 auth-port 1812 acct-port 1813 key ****
radius-server retransmit 3