cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1077
Views
0
Helpful
2
Replies

How to update wireless controller firmware from PI 3.1

Tony Dann
Beginner
Beginner

Hi bit of a newbie here,

We have just deployed Cisco Prime Infrastructure 3.1.2 in place of our old Cisco WCS.

All is working fine as far as managing our 50 or so controllers and their configs but I can not work out how to push firmware updates out to our WLC's from Prime Infrastructure???

Can anyone point me in the right direction to how I add the firmware images to P.I. and then push them out?

TIA

Tony

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

Tony,

The procedure is covered in the User guide here:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/user/guide/pi_ug/cfgwirelessdev.html#56832

View solution in original post

2 Replies 2

Marvin Rhoads
Hall of Fame
Hall of Fame

Tony,

The procedure is covered in the User guide here:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/user/guide/pi_ug/cfgwirelessdev.html#56832

Thank you Marvin,

I being a Cisco Newbie was looking in the Administrators Guide and couldn't find it.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: