07-04-2012 06:19 AM
Hello,
In a previous installation of CSM, RME was able to directly manage devices created in CSM. Now with CSM3.X I've lost this feature.
Any idea of how to solve this, or at least identify what is wrong ?
Thanks,
NH
07-04-2012 09:46 PM
RME 4.2 should still take your devices automatically from DCR of CSM. You may want to check if the RME is not configured by mistake for manual sync with DCR.
Usually RME should be in auto-sync with DCR so any device added/removed should automatically be managed/sync'd by RME as well.
This feature should be in :
Resource Manager Essentials > Admin > Device Mgmt > Device Management Settings > Enable Auto Mode (option) > Manage All Devices (option)
For mroe details, please check the guide :
-Thanks
Vinod
07-05-2012 12:39 AM
Hello Vinod,
This setting was already set to auto mode. So it looks like the issue is more between common services and CSM.
I'm able to see the two router manually created in Common Services, and they appear in RME. So maybe my issue is between CS and CSM
Any idea ?
Many thanks for your help,
NH
07-08-2012 05:03 AM
That should be very less as a possibility as CS would send device information to all the modules, unless any OGSServer process is down. Please share the screenshot for CS> DCR on how many devices are there and similarly for RME > device management.
If two devices show in RME, please make sure the other devices are not in other state like pending etc. If possible remove the auto sync and try to add the devices manually once and see if that works.
-Thanks
Vinod
07-09-2012 05:43 AM
I've manually added in CS a router, it correctly appears in RME (there's only an OID mismatch).
As I've create my router from CSM, is there something to do to sync CS with CSM ?
Or do I need to export my routers from CSM and import CSV file in CS ?
(I don't remember doing this with my old CSM installation)
Thanks,
NH
07-09-2012 11:32 AM
Ideally CSM should also get the device information automatically as CS is the main entity to deal with devices addition or removal. But NMS side includes CS and RME modules, whereas CSM is covered by security group.
I dont know if any security folks would have look into this, else you may try post the issue with CSM on CSC's Security forum as well.
-Thanks
07-25-2012 06:54 AM
ok,
done,
Thanks for your help,
NH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide