Importing firewalls in Firewall MC (VMS 2.2)

[sboukef]

Hello

We are trying to use CWVMS 2.2 to manage a 515 pix firewall.

The firewall have already been configured using the CLI, and have http server enabled.

Trying the command https://firewalladdress/exec/show%20config from the CWVMS server is ok.

When trying to import the firewall configuration into firewall MC, the server keeps "importing/waiting" for a long time (about an hour at least).

Any idea where does this come from ?

Thnk you in advance for your help.

[smalkeric]

Network object groups and their use in access lists is supported in Firewall MC 1.2. Service object group support in Firewall MC 1.3. If you are using any of the above object groups, then you might have to upgrade appropriatly.

[sboukef]

Hello

No object groups are used in the configuration.

The same installation on a W2K Pro machine (english version) works properly.

On two different W2K server machines (french version, regional options set to english), the application has the same behaviour : it keeps importing/waiting. And no traffic is originated from the server.

In all these cases, all system requirements (except from the amount of RAM required) are met.