Dear All,
I am facing issue on my IPSec L2L VPN. However I seem to get the packets decrypted, but they will not encrypt. The sh crypto ipsec sa command output is below. I have check this out with my remote site, and verified all configs. Any suggestions will be appreciated.
local ident (addr/mask/prot/port): (67.159.51.10/255.255.255.255/0/0)
remote ident (addr/mask/prot/port): (192.168.28.30/255.255.255.255/0/0)
current_peer: xx.xx.xx.xx
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 33683, #pkts decrypt: 33683, #pkts verify: 33683
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0