cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1250
Views
0
Helpful
2
Replies

Intergrating ACS 4.2 with Cisco Prime LMS 4.1

pmpesha
Level 1
Level 1

I am trying to populate the LMS 4.1 components to ACS.  Can you anyone advise me on how do this?  Thank you.

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

Note that LMS 4.x only uses ACS for Authentication. Authorization now needs to be set up locally on LMS. Reference here.

That said, you can have a look at this document, written from the perspective of LMS 3.2 and ACS 4.1, for the bits that need to be done on the ACS server.

View solution in original post

2 Replies 2

Marvin Rhoads
Hall of Fame
Hall of Fame

Note that LMS 4.x only uses ACS for Authentication. Authorization now needs to be set up locally on LMS. Reference here.

That said, you can have a look at this document, written from the perspective of LMS 3.2 and ACS 4.1, for the bits that need to be done on the ACS server.

pmpesha
Level 1
Level 1

Thank you very much for the info.  this is what I am looking for.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: