Inventry Error

vipul.vajshi · ‎06-01-2006

Hi,

When I 'Check Device Attributes' for Telnet/Tacacs/Tacacs Enable it says NOT SUPPORTED.

For C3550 and Catalyst 4003.

I have RME 3.3, any ideas?!?!

Thanks in advance.

nhabib · ‎06-01-2006

Chances are the device types are not supported.

If you go to RME -> Admin -> Inventory -> List Devices, are they represented by an SNMP icon?

vipul.vajshi · ‎06-01-2006

Yes I did not see that, they have SNMP on them when I list the devices.

So that means that this device is not supported then?

What about updating the devices, any chances of that, like RME33 IDU 3.0?

Thanks,

Vipul

nhabib · ‎06-01-2006

If they show up with an SNMP icon, then the device type is not supported.

You should definitely download / install the latest IDU for RME 3.3, and see if it helps.

If it doesn't, you will have to upgrade to a newer version of CiscoWorks.

vipul.vajshi · ‎06-01-2006

Hi Nhabib (Habib),

Fanastic... thanks very much, I will give this a go and hope it works.

Thanks,

Vipul