IP SLA responder on Catalyst 2960S stacked

[leeflight]

Hi

I have a pair of switches stacked:

Switch Ports Model                          SW Version          SW Image

------     -----     -----                             ----------                 ----------

     1    52      WS-C2960S-48FPS-L  15.0(1)SE             C2960S-UNIVERSALK9-M

*    2    52      WS-C2960S-48FPS-L  15.0(1)SE             C2960S-UNIVERSALK9-M

When I try to enable ip sla responder on the stack I get:

%SYS-3-HARIKARI: Process IP SLAs Responder top-level routine exited

I have been able to find a bug in the toolkit. Should ip sla responder be supported on the

stack as above?

Thanks

Lee Flight

[leeflight]

Also seen on the same hardware running

c2960s-universalk9-mz.122-58.SE2

Lee Flight

[leeflight]

The problem also exists in:

c2960s-universalk9-mz.122-58.SE2

on a standalone switch (not part of any stack).

However

c2960s-universalk9-mz.122-55.SE3

on a standalone switch is fine and works as expected.

[leeflight]

Also broken in

WS-C2960S-48FPS-L  15.0(1)SE1            C2960S-UNIVERSALK9-M

standalone or stacked.

[r.eads]

Doesn't work in 15.0(1)SE2 either. 

Mar 24 12:34:33 PDT: %SYS-3-HARIKARI: Process IP SLAs Responder top-level routine exited

Mar 25 09:27:20 PDT: %SYS-3-HARIKARI: Process IP SLAs XOS Event Processor top-level routine exited

[r.eads]

Still broken in 15.0(1)SE3.

Oct 25 18:46:26 PDT: %SYS-3-HARIKARI: Process IP SLAs Responder top-level routine exited

[ingo.batz]

I can confirm 15.0(1)SE3 still has the bug.

I just tested 15.0(2)SE3 released yesterday in a lab environment and....... (drum roll)..... no more HARIKARI . Hardware were two WS-C2960S-48FPS-L unstacked (one of them with installed stacking module though)

Haven't tried the earlier 15.0(2) (i.e. SE, SE1 and SE2) releases - maybe they work too.