It is an IP SLA lab I am working on - IPV^ OSPF on top 3 routers - 3 switches do not support this feature. Thought it would be inetresting to try another way to fill in OSPF protocol for IPV^. I am thinking EIGRP.
Any one have suggestions or thoughts?
Looks like the picture did not go through.
Yes IPv6. The top 3 routers have IPV6 OSPF protocol, the bottom 3 were meant to do the same but the switching image does not support OSPF IPv6, so it is a good opportunity to play around and find another solution.
Any suggestions of what protocol to use to establish IPV6 connectivity, Ip connectivity is already established.
R1 f0/0172.16.12.1/24 2001:db8:acad:12::1/64 fe80::1:1
R1 f1/0 172.16.1.1/24 2001:db8:acad:1721::1/64 fe80::1:2
G0/1 172.16.1.1/24 2001:db8:acad:1721::1/64 fe80::1:2
R2 f0/0 172.16.12.2/24 2001:db8:acad:12::2/64 fe80::2:1
R2 f1/0 172.16.23.2/24 2001:db8:acad:23::2/64 fe80::2:2
R2 Loopback 0 192.168.1.1/24 2001:db8:acad:1000::1/64 fe80::2:3
R3 f1/0 172.16.23.3/24 2001:db8:acad:23::3/64 fe80::3:1
R3 f0/0 172.16.3.1/24 2001:db8:acad:1723::1/64 fe80::3:2
D1 G1/0 172.16.1.2/24 2001:db8:acad:1721::2/64 fe80::d1:1
D1 VLAN 2 10.0.2.1/24 2001:db8:acad:2::1/64 fe80::d1:2
D1 VLAN 3 10.0.3.1/24 2001:db8:acad:3::1/64 fe80::d1:3
D2 G0/01 172.16.3.2/24 2001:db8:acad:23::3/64 fe80::d2:1
D2 VLAN 2 10.0.2.2/24 2001:db8:acad:2::2/64 fe80::d2:2
D2 VLAN 3 10.0.3.2/24 2001:db8:acad:3::2/64 fe80::d2:3
A1 VLAN 2 10.0.2.3/24 2001:db8:acad:2::3/64 fe80::a1:1
