There is one known bug with config archive locking up in LMS 3.2. If there are any OpenSSH devices in the network (e.g. WLCs, NAMs, etc.) then you could be seeing CSCtg43962. There is a patch, but you will need to open a TAC service request to get it and to confirm this is the problem. The TAC engineer will need a full thread dump from the ConfigMgmtServer process when the problem is occurring.
As of 10/21, you can now open SRs directly from CSC threads. See https://supportforums.cisco.com/docs/DOC-13613 for more details. Essentially, just click the "Open Service Request" link in the Actions panel in this thread and open the SR as you normally would. When you do, the TAC engineer will have all of the details of this CSC thread.
Help us make the Cisco smart building solutions more useful for your industry.
Let us know how important these solutions are to your company by answering this short 4-question survey (your responses will remain completely anonymous).
Please take a minute...
Introduction to Routing ProtocolsStatic vs DynamicDistance Vector vs Link StateRoute Selection AlgorithmSingle Routing Protocol OnlyOpen Shortest Path First (OSPF)AreasRoute ConvergencePath SelectionMetric CalculationCharacteristicsEnhanced Interior Gatew...
Cisco DNA Center version 2.2.2.x includes the features and improvements that
New intelligence provides an easy, gradual, and complete adoption of SD-Access. Faster Cisco DNA Center set-up saves time and effort.
When using Cisco cellular modules with a SIM card an APN must be provided. The APN cannot be stored in the SIM card and is supplied by your SIM card provider. Cisco cellular software contains a database of well-known APNs based on the country and ...
Cisco 3850: IOS-XE/Firmware Upgrade
This procedure is aimed at Cisco 3850 switch ONLY.
IOS-XE Bundle Mode is not covered.
9300, 9500 (vanilla & high-performance), ISR 1k, ISR 4k and ASR is not covered.