cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
638
Views
0
Helpful
1
Replies
Highlighted

LMS 4.0.1 : Workflow VLAN assignment issue on VSS and 3750

Hi,

I'm running on LMS 4.0.1 with latest update and upgrade package (not the lms 4.1).

I have : VSS running on 12.2(33)SXJ1

and 3750x running on 12.2(58)SE2

When I try to perform some VLAN Port assignment change, I cannot do it through the Workflow :

Config > Workflow > VLAN > Config port assignment

When I click on the VSS and then "List ports", the list of the ports is clear ! The VLAN list is correct.

When I click on the 3750 and then "List ports", the list of the ports is complete, BUT the VLAN list is incorrect, with this kind of VLAN list :

"inactive1 NULL"

"inactive101 NULL"

"inactive2 NULL"

...

What could be the problem ?

By which way can I easy change port vlan assignment and see what's the port status at the same moment ?

By the way, in CiscoView : is it also normal that I cannot change configuration of port that are not wired-connected on the switches ? Gi1/0/10 is connected and I can change POE, etc...but the Gi1/0/5 is not plugged and I have only physical information of the link.

Thank you for your help

1 REPLY 1
Highlighted

Is there anybody encountered the problem ?

Content for Community-Ad