cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1036
Views
0
Helpful
2
Replies
ALINA ANDIRAOS
Beginner

LMS 4.2, User Tracking Utility

                   Hello everyone;

I had a new installation of LMS 4.2 and everythinks works fine but User trucking utility database has an empty host name / IP address. Any one knows the reason why this information is not polled ?

Thanks

Alina Andiraos

2 REPLIES 2

Hi Alina,

Seems that you have configured SNMP V3 on your devices. If this is the case, the command below will be required for every VLAN on every device running SNMP V3:

snmp-server group group_name v3 auth context vlan-vlan_id

example:

snmp-server group LMS v3 auth context vlan-1

snmp-server group LMS v3 auth context vlan-2

Have a good day.

Moath Rawasheh

Thanks for your response...All the Devices run SNMP v2..