LMS Prime 4.2 instalation fail

[natomiast]

Hi,

I have problem with Cisco LMS 4.2 Prime installation.

My system specification:

Freash instalation of Windows Server 2008 R2 Enterprise Edition 64Bit on VMware vSphere Hypervisor 4.1 (ESXi server 4.1).

Hardware:

16GB RAM, 256 GB HDD, CPU E5420.

When I started installation I get an error:

------------------------------------------------------

ERROR: db not found

ERROR: Component db is not found.

mdcbase : depends on: cmfwd plug db ess

cdone : contains: cmfwd plug cmf mdcbase

cdone : contains: cmfwd plug cmf mdcbase

-----------------------------------------------------

Maybe someone know the solution for that error and can help

Thanks for any help

[Joel Monge]

It seems you are installing the service pack 4.2.2 without having installed base version 4.2.  Which exactly is the file you are running?

[zahmed001]

Dear Joel I am having the same above problem.

I have Cisco LMS 4.2.5 and i am installing it on windows server 2012 standard.

Please see the error in attachment.

Wainting for your reply.

[Vinod Arya]

You should ideally open a new thread, instead of replying to a 2 years old thread to continue. You could use link for reference.

Which Server version are you using? Is LMS 4.2 already installed on the machine?

LMS 4.2.5 is is not the entire installable package. It needs to have LMS 4.2 installed already. Following is the Upgrade path to LMS 4.2.5:

Current LMS Version	Type of Upgrade	Procedure
LMS 4.2.3	Remote migration	1. Install LMS 4.2.4 and take a backup of the LMS 4.2.4 data. 2. Install LMS 4.2.5 3. Migrate your backup data to LMS 4.2.5 using the instructions explained in the section Remote Upgrade to LMS 4.2.5.
	Direct migration	1. Install LMS 4.2.4 2. Install LMS 4.2.5 The backup data is automatically migrated during installation.
LMS 4.2.2	Remote migration	1. Install LMS 4.2.4 and take a backup of the LMS 4.2.4 data. 2. Install LMS 4.2.5 3. Migrate your backup data to LMS 4.2.5 using the instructions explained in the section Remote Upgrade to LMS 4.2.5.
	Direct migration	1. Install LMS 4.2.4 2. Install LMS 4.2.5 The backup data is automatically migrated during installation.
LMS 4.2.1	Remote migration	1. Install LMS 4.2.2 2. Install LMS 4.2.4 and take a backup of the LMS 4.2.4 data. 3. Install LMS 4.2.5 4. Migrate your backup data to LMS 4.2.5 using the instructions explained in the section Remote Upgrade to LMS 4.2.5.
	Direct migration	1. Install LMS 4.2.2 2. Install LMS 4.2.4 3. Install LMS 4.2.5 The backup data is automatically migrated during installation.
LMS 4.1	Remote migration	1. Install LMS 4.2 and take a backup of the LMS 4.2 data. 2. Install LMS 4.2.5 3. Migrate your backup data to LMS 4.2.5 using the instructions explained in the section Remote Upgrade to LMS 4.2.5
	Direct migration	1. Install LMS 4.2 2. Install LMS 4.2.5 The backup data is automatically migrated during installation.

For details on installing procedure of LMS 4.2.5, please check its release notes here :

http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2-5/release/notes/lms4_2_5_release_notes.html#14050

-Thanks

Vinod

**Encourage Contributors. RATE Them.**