LMS 3.2 RME 4.3
I can't choose the device in RME, this device has the same configuration like others, place in the same group in ACS,
I have tried remove and add again ,nevertheless nothing happened.
Please see the attached file.
In LMS : Cisco Catalyst 2960-48PST-L Switch
and from device:
cisco WS-C2960-48PST-L (PowerPC405) processor (revision D0) with 61440K/4088K bytes of memory.
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(46)SE, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 21-Aug-08 15:59 by nachen
Image text-base: 0x00003000, data-base: 0x01200000
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(46r)SE2, RELEASE SOFTWARE (fc1)
System returned to ROM by power-on
System image file is "flash:/c2960-lanbasek9-mz.122-46.SE/c2960-lanbasek9-mz.122-46.SE.bin"
Last reset from power-on
2 Virtual Ethernet interfaces
48 FastEthernet interfaces
4 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Motherboard assembly number : 73-11882-08
Power supply part number : 341-0266-03
Motherboard serial number :
Power supply serial number : DCA1424H4NF
Model revision number : D0
Motherboard revision number : A0
Model number : WS-C2960-48PST-L
System serial number :
Top Assembly Part Number : 800-30874-04
Top Assembly Revision Number : B0
Version ID : V03
CLEI Code Number : COMC400ARA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 52 WS-C2960-48PST-L 12.2(46)SE C2960-LANBASEK9-M
Check your version of the RME Cat2960 package. The latest is 6.4 and support for this 2960 switch is available. If you do not have, go to Common Services > Software Center > Device Update and download and install all available updates for Common Services and RME. Once that is done, RME will be able to fully manage these switches.