Menu for changing the APN of a cisco 819G LTE

[rbinkhorst]

I've made a emm mdf for the 88x G routers for changing some cellular parameters. (attached)
This menu is started by the customer with autocommand for a specific user so they can change the sim-card / provider without our assistance.

For the new 819G LTE routers I adjusted the menu for use with lte.
When I use this menu the router cli session hangs.
The "cellular 0 lte profile create" command seems to be the issue.

I tried different ways for configuring, mdf native, tcl embedded, native tclsh.

Is there anyone with experience in this matter.

regards,

Rene

[Dan Frey]

I can not find "cellular 0 lte profile create" in your file but i did find "cellular 0 gsm profile create 1 ".  What command does it take when you enter this manually?

[rbinkhorst]

The file attached is for 88xG routers, which use "cellular 0 gsm" commands.

I changed the commands for the 819 router.
the issue is tested manually with tclsh

Router#tclsh
Router(tcl)#exec {cellular 0 lte profile create 1 apnname}

***** hangs *****