cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5848
Views
0
Helpful
1
Replies

Multi-line Banners

greggkelly
Level 1
Level 1

Hi,

I have an ASA 5505 running 8.2(2).  What's the correct syntax for creating multi-line exec and login banners? The only examples that I've been able to find have very short banners.

Any guidance would be appreciated.

Thanks,

Gregg

1 Reply 1

AFROJ AHMAD
Cisco Employee
Cisco Employee
Hi Gregg,

You can enter multi-line commands as a part of User-defined and Adhoc tasks.
The multi-line commands must be within the tag and .

These tags are case-sensitive and you must enter them only in uppercase.
You cannot start this tag with a space.


Example

banner login "Welcome to

CiscoWorks Resource Manager

Essentials - you are using

Multi-line commands"




You can have a blank line within a multi-line command. The commands within
the MLTCMD tags are considered as a single command and will be downloaded as
a single command onto the device.

I hope this will work for you !!!

Thanks--
Afroj


Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****