my SPF's PID and other information have problems

[GH_Lee]

hello.

i use GLC-SX-MMD from cisco on WS-X6848-SFP

but oneday i check on console, two of SFP's information shows wrong or maybe RAW

it looks like on below.

NAME: "Chassis 2 Transceiver Gi2/1/18", DESCR: "Chassis 2 SFP Transceiver 1000BaseSX Gi2/1/18"
PID: 0x474C432D53582D4D4D44202020202020202020 ,VID: 0x56303120 ,SN: 0x464E5331393231303756582020202020

NAME: "Chassis 2 Transceiver Gi2/1/24", DESCR: "Chassis 2 SFP Transceiver 1000BaseSX Gi2/1/24"
PID: 0x474C432D53582D4D4D44202020202020202020 ,VID: 0x56303120 ,SN: 0x464E533139323130374D392020202020

is this problem with my SFPs or linecard? can't find information about this RAW data.

if you know about this problem, hope you tell me to fix this.

Regards.

[marce1000]

 - I don't see any problems , these messages are informational.

 M.

[GH_Lee]

Hello Marce

thanks for your reply.

I think those two SFPs infromation looks like RAW data.

the other SFP's PID and other informations are not 0x4 or anything.

can see right PID and VID and SN. i attach information on below.

NAME: "Chassis 2 Transceiver Gi2/1/5", DESCR: "Chassis 2 SFP Transceiver 1000BaseSX Gi2/1/5"
PID: GLC-SX-MMD , VID: V01 , SN:

Regards.