We have just purchased a number of the 2960s model switches. I have one 'odd-ball' version of the switches out right now, it is WS-C2960S-48TS-S. It can't get it to sync the archive. No other device is having problems. The error states to check the DCMA log, but there is nothing of note in there. Credentials pass, but testing the TFTP fails. Any ideas?
The switch is up and running properly (seemingly so anyway). I discovered the problem later when I was looking at LMS and noticed there was a unit that was not collecting its config. I updated the software to it and that did not help. (see version information below).
I have now also noticed that it does not seem to understand 'ip dhcp snooping'.
Here is the switch version information:
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2010 by Cisco Systems, Inc. Compiled Sat 07-Aug-10 23:21 by prod_rel_team Image text-base: 0x00003000, data-base: 0x01B00000
ROM: Bootstrap program is Alpha board boot loader BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(53r)SE, RELEASE SOFTWARE (fc3)
ACCESS-202N25-2960-01 uptime is 15 hours, 21 minutes System returned to ROM by power-on System restarted at 17:59:52 DST Mon Nov 1 2010 System image file is "flash:/c2960s-universalk9-mz.122-55.SE/c2960s-universalk9-mz.122-55.SE.bin"
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html you require further assistance please contact us by sending email to firstname.lastname@example.org. WS-C2960S-48TS-S (PowerPC) processor (revision B0) with 131072K bytes of memory. Processor board ID FOC1431Z1G6 Last reset from power-on 1 Virtual Ethernet interface 1 FastEthernet interface 50 Gigabit Ethernet interfaces The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address : E8:04:62:1E:76:80 Motherboard assembly number : 73-12424-06 Power supply part number : 341-0327-01 Motherboard serial number : FOC14311LHX Power supply serial number : LIT14250NQD Model revision number : B0 Motherboard revision number : A0 Model number : WS-C2960S-48TS-S Daughterboard assembly number : 73-11933-04 Daughterboard serial number : FOC14312467 System serial number : FOC1431Z1G6 Top Assembly Part Number : 800-32452-02 Top Assembly Revision Number : A0 Version ID : V02 CLEI Code Number : COMGK00ARB Daughterboard revision number : A0 Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 50 WS-C2960S-48TS-S 12.2(55)SE C2960S-UNIVERSALK9-M
はじめに確認方法Version による Application name の変更について備考参考情報 はじめに本ドキュメントでは Cisco SD-WAN における Policy 上で設定可能な Application を確認する方法について記載しています。 確認方法サポートされている Application name についてはご使用されている vManage へ API を呼び出して確認することが可能です。https://<IP or FQDN>/...
DMVPN (Dynamic Multipoint VPN) Introduced by Cisco in late 2000 is a routing technology you can use to build a VPN network with multiple sites (spokes) without having to statically configure all devices. It’s a “hub and spoke” network, where the spok...
On 24th August 2021, Cisco announced the latest IOS XE release - Cisco IOS XE Bengaluru 17.6.1a
IOS XE 17.6.1a unlocks various routing features and enhancements comprehensively covering different technology segments such as voice, security,...
DMVPN (Dynamic Multipoint VPN) Introduced by Cisco in late 2000 is a routing technology you can use to build a VPN network with multiple sites (spokes) without having to statically configure all devices. It’s a “hub and spoke” network, where th...
SummaryRequirementsConfiguration StepsVerificationFAQTroubleshootingReferences & Tools
In the past when IOS 12.x was hot stuff we used MD5 to authenticate OSPF neighbors. This worked great on ethernet networks because OSPF is a m...