I have configured a NTP server on a Nexus 3548:
hq3548Xsw01# sho run | incl ntp
ntp server 10.1.6.220 use-vrf managment
ntp source-interface mgmt0
However, the switch is not pulling time. I want the switch to act as a client only. No authentication is required to get time from the server.
NTP status shows:
hq3548Xsw01# sho ntp status
Distribution : Disabled
Last operational state: Commit operation failed
The NTP server is accessible from the management VRF mgmt0
hq3548Xsw01# ping 10.1.6.220 vrf management
PING 10.1.6.220 (10.1.6.220): 56 data bytes
64 bytes from 10.1.6.220: icmp_seq=0 ttl=254 time=0.724 ms
64 bytes from 10.1.6.220: icmp_seq=1 ttl=254 time=0.53 ms
64 bytes from 10.1.6.220: icmp_seq=2 ttl=254 time=0.543 ms
64 bytes from 10.1.6.220: icmp_seq=3 ttl=254 time=0.52 ms
64 bytes from 10.1.6.220: icmp_seq=4 ttl=254 time=0.508 ms
--- 10.1.6.220 ping statistics ---
5 packets transmitted, 5 packets received, 0.00% packet loss
round-trip min/avg/max = 0.508/0.564/0.724 ms
What am I missing?