06-05-2021 03:05 AM
Hello,
I am retrieving the interfaces configurations and statistics with netconf and ncclient on a Nexus switch.
I have installed the mtx-openconfig-all-1.0.0.0-9.2.3.lib32_n9000.rpm on the nexus and the request xml is this one:
<interfaces xmlns="http://openconfig.net/yang/interfaces"> <interface> <name>eth1/1</name> </interface> <interface> <name>eth1/2</name> </interface> <interface> <name>eth1/3</name> </interface> <interface> <name>eth1/4</name> </interface> <interface> <name>eth1/5</name> </interface> <interface> <name>eth1/6</name> </interface> <interface> <name>eth1/7</name> </interface> <interface> <name>eth1/8</name> </interface> <interface> <name>eth1/9</name> </interface> </interfaces>
OrderedDict([ ('in-broadcast-pkts', '0'), ('in-discards', '0'), ('in-errors', '0'), ('in-multicast-pkts', '0'), ('in-octets', '0'), ('in-unicast-pkts', '0'), ('in-unknown-protos', '0'), ('out-broadcast-pkts', '0'), ('out-discards', '0'), ('out-errors', '0'), ('out-multicast-pkts', '0'), ('out-octets', '0'), ('out-unicast-pkts', '0') ]))
Solved! Go to Solution.
06-13-2021 07:52 AM
06-13-2021 07:52 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide