PI 2.1 questions

[omer shtivi]

Hi,

I got some questions regarding PI 2.1

Can I search in all devices configuration to see if specifc command exist?

When I'm using discovery, my devices got 100% CPU, and under show proccess cpu I see that the SNMP proccess is taking all the cpu. is it normal? the switches are 3750X running version 15.2 and Nexus 5K running 6.0.2

Can I upload a specific MIBs?

Best regards,

Omer Shtivi

[AFROJ AHMAD]

Hi Omer,

AFASIk, Compliance check feature is still missing in PI 2.1.

For CPU , better you look at  the logs and try to find out the MIB causing issue.

when the CPU is high , collect the  output of  :: show stack<PID of SNMP Engine>

with this you can go to TAC to find out the issue.

Yes , you can upload the MIBS, check the below link for more information:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/1-2/user/guide/prime_infra_ug/create_temp_mon.html#pgfId-1066507

Thanks-

Afroz

****Ratings Encourages Contributors ****

[omer shtivi]

Hi,

Thank you for your response.

Does this table says that 15.2 version is supported?

Device Type	SYSOIDS	S/W Version	Software
Cisco Catalyst 3750E-24TD-E,S Switch	OID:1.3.6.1.4.1.9.1.789	>=12.2	IOS
Cisco Catalyst 3750E-48TD-E,S Switch	OID:1.3.6.1.4.1.9.1.790	>=12.2	IOS
Cisco Catalyst 3750E-48PD-E,S Switch	OID:1.3.6.1.4.1.9.1.791	>=12.2	IOS
Cisco Catalyst 3750E-24PD-E,S Switch	OID:1.3.6.1.4.1.9.1.792	>=12.2	IOS

[AFROJ AHMAD · Accepted solution]

Does this table says that 15.2 version is supported?

Yes  ,15.2 should be supported as per the table.

Thanks-

Afroz