Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
We recently upgraded to version 8.7 (beta) and we see that from version 8.6 there are more options to use dot1x as supplicant for APs:
EAP-FAST
EAP-TLS
PEAP
For EAP-TLS, which certificate the AP is using? and can we change it?
Hello,
We have N9K-C93108TC-EX (48 ports Copper and 6 ports QSFP)
We want to connect a FW using 1G optics so we need to "lower" the speed of the 40G.
So we bought CVR-QSFP-SFP10G and we put a Multi-mode SFP We did the breakout command:
interface brea...
Hello everyone!
We are using ISE 2.3 with Anyconnect 4.5 and we are trying to create a posture check for a Symantec application.
Context-Visibility ->Application, marked Symantec, Version Any, Added compliance name, Application installed, Remediation...
Greetings everyone!
We are running ISE v2.3.1 and want to deploy wired eap-tls authentication.
When we enable the authentication we see the error "client abounded eap session and started a new one"
We did a sniffer and after the server key exchange...
Hi,
We are using ISE version 2.2
When we try to use BYOD for android devices we receive the NSP, but when trying to download the network support assistant the android device disconnect us from the SSID (probably because we didn't finished the web aut...
Don't need 40 1G, need 1G.
Found out its a version most probably, https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html#_Toc508962836
So upgrading now:
NXOS-703I7.1
