Power supplies for a 7200 series router

[getwithrob]

Is there a command I can issue to see the power supplies in a 7206 router?

[getwithrob]

'Looks like show env all will work....

[David Stanford]

how about show env all

ex)

router>sh env all

Power Supplies:

Power Supply 1 is QCS DC Power Supply. Unit is off.

Power Supply 2 is Zytek AC Power Supply. Unit is on.

Temperature readings:

chassis inlet measured at 16C/60F

chassis outlet 1 measured at 20C/68F

chassis outlet 2 measured at 26C/78F

chassis outlet 3 measured at 34C/93F

Voltage readings:

+3.45 V measured at +3.49 V

+5.15 V measured at +5.21 V

+12.15 V measured at +12.29 V

-11.95 V measured at -11.85 V

[getwithrob]

Thnks for the input. Is this the only way? We have several hundres 7206 and 7505&7 series devices. Surely there has got to be away to report on the power supplies. How about a show diag where the information is emailed to Cisco and a response is received showing information like card details?

Just a note: I ran the detailed device report and NOTHING shows for the Power Supplies on these 7000 series devices.