Hello! I have a problem with distribution IOS on Cisco devices. PI version is 2.1.
I have the image on local repository. When i try to distribute it on any devise i receive the following error (space on the flash enough):
On Prime web interface - Jobs Dashboard:
SWIM5018: Copy operation Failed. Probable Causes : 1. Connection Time out. 2. Disk Space full. Recommended Action: 1.Please check the connectivity of the device. 2.Check if enough space is available for copy operation.Error loading image to Flash.For more details please check /opt/CSCOlumos/conf/ifm/swim/jobs/10.10.10.10_tftp_telnet.log for the output from the device on which the image transfer failed.Image Copy Operation Failed
On Prime log repository - /opt/CSCOlumos/conf/ifm/swim/jobs/10.10.10.10_tftp_telnet.log:
ade # vi 10.10.10.10_tftp_telnet.log
dir /all flash:
Directory of flash:/
2 -rwx 6918153 Mar 1 1993 00:55:38 +00:00 c2970-lanbasek9-mz.122-44.SE.bin
4 -rwx 4014 Mar 5 1993 23:45:28 +00:00 private-config.text
5 -rwx 5324 Nov 8 2012 07:44:00 +00:00 vlan.dat
6 -rwx 7560 Mar 1 1993 01:54:28 +00:00 23052014.cfg
7 -rwx 5144 Mar 5 1993 23:45:28 +00:00 multiple-fs
8 -rwx 3828 Mar 5 1993 23:45:28 +00:00 config.text
15998976 bytes total (9052160 bytes free)
HOSTNAME#copy tftp://10.5.5.5//c2970-lanbasek9-mz.122-44.SE6.bin flash:c2970-lanbasek9-mz.122-44.SE6.bin
Destination filename [c2970-lanbasek9-mz.122-44.SE6.bin]? c2970-lanbasek9-mz.122-44.SE6.bin
Accessing tftp://10.5.5.5//c2970-lanbasek9-mz.122-44.SE6.bin...
Loading c2970-lanbasek9-mz.122-44.SE6.bin from 10.5.5.5 (via Vlan110): !... [timed out]
%Error reading tftp://10.5.5.5/c2970-lanbasek9-mz.122-44.SE6.bin (Timed out)
HOSTNAME#disable 1
HOSTNAME>
HOSTNAME>
HOSTNAME>_tune_^H ^H^H ^H^H ^H^H ^H^H ^H^H ^H
HOSTNAME>
As i see, there is a TFTP timeout on session from Prime.
I've seen topics related to this, but I have not found an acceptable solution. Tell me, is there any way to solve this problem?
Thanks in advance
