cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2533
Views
0
Helpful
2
Replies

Prime Infrastructure importing templates

chris-gibbs
Beginner
Beginner

Hi all,

We have an existing WCS setup (7.0.240.0).

I have built up a Prime Infrastructure server running release 1.3.0.20.

Originally I was going to look at migrating our existing WCS configure but the two stage process (WCS -> NCS -> Prime) looked prone to errors. Dediced to skip it and concentrate and building up from blank slate.

The only exception was the floorplan maps for Wifi, I was able to export these straight from WCS to Prime without any hicups.

I then added our main WLC and assigned the APs to the correct maps.

Sweet!

Now I would like to get the templates going for our WLCs as i have a couple more to deploy. The issue is that I dont want to manually configure templates in Prime. WCS had the ability to import templates from an existing WLC, a goldern WLC config. I cant seem to find any doco indicating this ability. Anyone come across something similar or another way I might acheive?

Cheers

Chris

1 Accepted Solution

Accepted Solutions

Rob Johnson
Cisco Employee
Cisco Employee

From the Classic Theme:::

Go to Configure> Controllers, Select the Controller(s), select Discover Templates from Controllers

http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/ctrlcfg.html#wp2147938

View solution in original post

2 Replies 2

Rob Johnson
Cisco Employee
Cisco Employee

From the Classic Theme:::

Go to Configure> Controllers, Select the Controller(s), select Discover Templates from Controllers

http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/ctrlcfg.html#wp2147938

Thanks Rob, worked great.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers