cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
521
Views
0
Helpful
1
Replies

Problem with the Firewall and DHCP in Packet Tracer

Alexor1
Level 1
Level 1

Hi, I need help. DHCP Server 2 is not assigning IPs to VLANs 70 and 80. I thought it was an ACL issue, but I just reconfigured it and the problem persists. VLANs 10, 20, and 30 are receiving DHCP service correctly. So I'm not sure where the issue is, because when I ping from either of the DHCP servers to any Layer 3 router, there is communication—even with the ones connected to VLANs 70 and 80. But as soon as I try to ping their PCs, it doesn't know how to reach them, or the firewall on the left blocks the traffic. I'd appreciate your help. I've attached my .pkt file

1 Reply 1

Mark Elsen
Hall of Fame
Hall of Fame

 

                     - FYI : Community group for Packet Tracer project questions

   M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)