push config from Prime using snmp?

[jerry.larson]

Is it possible to send a config via snmp using Prime if you can not get to exec prompt on cli?

[marce1000]

  - On condition  that the particular config was saved by Prime (earlier) and that the switch was entered with a correct snmp write community (string), and is snmp-reachable (via that string), from Prime.

         http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/user/guide/pi_ug/chgdevconfig.html#pgfId-1053377

           This also implies that the switch was previously known to Prime, and has configuration archives from it.

M.