"No route to host" on Cisco ASA 5505 Series

[Dandarius]

Hi all,

I apologise if I miss anything out or don't understand straight away, as I am new to networking.

I have been given a Cisco 5505 Series Firewall to mess around with, and I have a few questions. (I am using PuTTY as the virtual terminal connection).

I have connected the firewall up to my PC using a console connection, and have internet connection to my network.

When trying to ping a machine, I get the message "no route to host".

Is this because I haven't configured the firewall correctly, and if so, how do I?

Also, if I wanted to integrate the firewall into a network, would it interrupt DHCP, or would I be able to assign it a static address without having to worry about that?

[MHM Cisco World]

first share the topology second please also share the config 

[Dandarius]

Sorry, I'm quite new to all this. The config for the subnet is 255.255.255.0.

As for the topology, I'm not really sure. Was just wondering if I could configure the DHCP and integration in the command line interface.