02-22-2023 04:06 AM
Hi all,
I apologise if I miss anything out or don't understand straight away, as I am new to networking.
I have been given a Cisco 5505 Series Firewall to mess around with, and I have a few questions. (I am using PuTTY as the virtual terminal connection).
I have connected the firewall up to my PC using a console connection, and have internet connection to my network.
When trying to ping a machine, I get the message "no route to host".
Is this because I haven't configured the firewall correctly, and if so, how do I?
Also, if I wanted to integrate the firewall into a network, would it interrupt DHCP, or would I be able to assign it a static address without having to worry about that?
02-22-2023 04:31 AM
first share the topology second please also share the config
02-22-2023 04:46 AM
Sorry, I'm quite new to all this. The config for the subnet is 255.255.255.0.
As for the topology, I'm not really sure. Was just wondering if I could configure the DHCP and integration in the command line interface.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide