08-07-2016 09:24 PM
Cisco IOS Software, 901 Software (ASR901-UNIVERSALK9-M), Version 15.4(3)S, RELEASE SOFTWARE (fc3)
####Syslogging shows 52 reloads in the last 3 months and says Reload requested by Environmental monitor. Reload Reason: Forced Reload
BPS27.JUD#sh version
Cisco IOS Software, 901 Software (ASR901-UNIVERSALK9-M), Version 15.4(3)S, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Sun 27-Jul-14 12:26 by prod_rel_team
ROM: System Bootstrap, Version 15.4(3r)S3, RELEASE SOFTWARE (fc1)
BPS27.JUD uptime is 1 day, 6 hours, 21 minutes
System returned to ROM by power-on
System restarted at 09:52:18 NZST Sun Aug 7 2016
System image file is "flash:asr901-universalk9-mz.154-3.S.bin"
Last reload type: Normal Reload
Last reload reason: Forced Reload
#### Above says...... Last reload reason: Forced Reload... I believe this is a bug due to the constant fan bumping alarms causing the below issue that says WARNING: Event Table Overflowed !!!
BPS27.JUD#sh environment
Power Supply Status:
12AV Supply: +12.010 V Normal
1.5V Supply: +1.510 V Normal
12BV Supply: +11.980 V Normal
2.5V Supply: +2.510 V Normal
1.05V Supply: +1.090 V Normal
1.2V Supply: +1.200 V Normal
1.8V Supply: +1.800 V Normal
Fan Status:
Fan 1 Operation: Normal, is running at 13 percent speed
Fan 2 Operation: Failed
Alert settings:
Board temperature, temperature warning: Enabled
Threshold: 83 (high) -40 (low) DegC
Board Temperature: Normal
Board temperature, temperature = 30 (C), Normal
Environmental monitor experienced the following events:
WARNING: Event Table Overflowed !!!
SeqNum Event State Time
4 : Fan : "2 fail " at 11:55:35 NZST Sun Aug 7 2016.
5 : Fan : "2 fail " at 12:55:34 NZST Sun Aug 7 2016.
6 : Fan : "2 fail " at 13:55:34 NZST Sun Aug 7 2016.
7 : Fan : "2 fail " at 14:55:34 NZST Sun Aug 7 2016.
8 : Fan : "2 fail " at 15:55:34 NZST Sun Aug 7 2016.
9 : Fan : "2 fail " at 16:55:34 NZST Sun Aug 7 2016.
10 : Fan : "2 fail " at 17:55:34 NZST Sun Aug 7 2016.
11 : Fan : "2 fail " at 18:55:34 NZST Sun Aug 7 2016.
12 : Fan : "2 fail " at 19:55:34 NZST Sun Aug 7 2016.
13 : Fan : "2 fail " at 20:55:34 NZST Sun Aug 7 2016.
14 : Fan : "2 fail " at 21:55:34 NZST Sun Aug 7 2016.
15 : Fan : "2 fail " at 22:55:34 NZST Sun Aug 7 2016.
16 : Fan : "2 fail " at 23:55:34 NZST Sun Aug 7 2016.
17 : Fan : "2 fail " at 00:55:34 NZST Mon Aug 8 2016.
18 : Fan : "2 fail " at 01:55:34 NZST Mon Aug 8 2016.
19 : Fan : "2 fail " at 02:55:34 NZST Mon Aug 8 2016.
20 : Fan : "2 fail " at 03:55:34 NZST Mon Aug 8 2016.
21 : Fan : "2 fail " at 04:55:34 NZST Mon Aug 8 2016.
22 : Fan : "2 fail " at 05:55:34 NZST Mon Aug 8 2016.
23 : Fan : "2 fail " at 06:55:34 NZST Mon Aug 8 2016.
24 : Fan : "2 fail " at 07:55:34 NZST Mon Aug 8 2016.
25 : Fan : "2 fail " at 08:55:34 NZST Mon Aug 8 2016.
26 : Fan : "2 fail " at 09:55:34 NZST Mon Aug 8 2016.
27 : Fan : "2 fail " at 10:55:34 NZST Mon Aug 8 2016.
28 : Fan : "2 fail " at 11:55:34 NZST Mon Aug 8 2016.
29 : Fan : "2 fail " at 12:55:34 NZST Mon Aug 8 2016.
30 : Fan : "2 fail " at 13:55:34 NZST Mon Aug 8 2016.
31 : Fan : "2 fail " at 14:55:34 NZST Mon Aug 8 2016.
32 : Fan : "2 fail " at 15:55:34 NZST Mon Aug 8 2016.
BPS27.JUD#
08-08-2016 01:45 AM
- Looks like you have a fan-board failure; have your hardware repaired.
M.
08-30-2016 10:56 PM
- Yes thanks, I realise that but it shouldn't cause ASR901 to reload. The temperature is normal and the other fan is working fine and the power supply status is fine.
Fan fails shouldn't cause the ASR901 to self reload.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide