cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2507
Views
0
Helpful
25
Replies

RESTConf Install error

swDev
Level 1
Level 1

Hi, I'm trying to use RESTConf to test IOS upgrades, but I'm getting a malformed message error. 

I'm on Cisco IOS XE Software, Version 17.02.01r trying to upgrade to 17.03.04a

 

I'm doing a post to 

https://{{ _.router }}/restconf/operations/Cisco-IOS-XE-install-rpc:install

with this in the body: 

 

{
    "Cisco-IOS-XE-install-rpc:input": {
        "uuid": "test",
        "one-shot": true,
	"path": "bootflash:isr4400-universalk9.17.03.04a.SPA.bin",
         reloadfast": true
    }
}

but I receive a 400 Bad request error: 

 

{
	"errors": {
		"error": [
			{
				"error-message": "application error",
				"error-path": "/Cisco-IOS-XE-install-rpc:install",
				"error-tag": "malformed-message",
				"error-type": "application"
			}
		]
	}
}

Does anyone know what the issue is? Other RestConf operations like reload work fine

 

25 Replies 25

Hello,

 

tough one. Are you able to execute any other (simple) RESTCONF operation (such as retrieving interface information) ? The reason I am asking is that the error might apply to the specific action you want to execute (IOS upgrade)...

 

Also, the problem might be with the YANG module installed on your client. I checked Github and I think you need this one:

 

https://github.com/YangModels/yang/blob/main/vendor/cisco/xe/1731/Cisco-IOS-XE-install-rpc.yang

Hi, 

Thank you for your response. Yes, I have been able to execute ios-xe-rpc:copy and ios-xe-rpc:reload. When I do a GET on /restconf/operations I get: 

 

<operations
	xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf">
	<ios-xe-cell-rpc:cellular
		xmlns:ios-xe-cell-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-cellular-rpc">/restconf/operations/Cisco-IOS-XE-cellular-rpc:cellular
	</ios-xe-cell-rpc:cellular>
	<ios-xe-cts-rpc:cts
		xmlns:ios-xe-cts-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-cts-rpc">/restconf/operations/Cisco-IOS-XE-cts-rpc:cts
	</ios-xe-cts-rpc:cts>
	<install-ios-xe-rpc:install
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:install
	</install-ios-xe-rpc:install>
	<install-ios-xe-rpc:activate
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:activate
	</install-ios-xe-rpc:activate>
	<install-ios-xe-rpc:install-commit
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:install-commit
	</install-ios-xe-rpc:install-commit>
	<install-ios-xe-rpc:remove
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:remove
	</install-ios-xe-rpc:remove>
	<install-ios-xe-rpc:deactivate
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:deactivate
	</install-ios-xe-rpc:deactivate>
	<install-ios-xe-rpc:abort
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:abort
	</install-ios-xe-rpc:abort>
	<install-ios-xe-rpc:auto-abort-timer
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:auto-abort-timer
	</install-ios-xe-rpc:auto-abort-timer>
	<install-ios-xe-rpc:rollback
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:rollback
	</install-ios-xe-rpc:rollback>
	<ios-xe-rpc:default
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:default
	</ios-xe-rpc:default>
	<ios-xe-rpc:clear
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:clear
	</ios-xe-rpc:clear>
	<ios-xe-rpc:crypto
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:crypto
	</ios-xe-rpc:crypto>
	<ios-xe-rpc:release
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:release
	</ios-xe-rpc:release>
	<ios-xe-rpc:reload
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:reload
	</ios-xe-rpc:reload>
	<ios-xe-rpc:factory-reset
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:factory-reset
	</ios-xe-rpc:factory-reset>
	<ios-xe-rpc:license
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:license
	</ios-xe-rpc:license>
	<ios-xe-rpc:service
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:service
	</ios-xe-rpc:service>
	<ios-xe-rpc:virtual-service
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:virtual-service
	</ios-xe-rpc:virtual-service>
	<ios-xe-rpc:copy
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:copy
	</ios-xe-rpc:copy>
	<ios-xe-rpc:delete
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:delete
	</ios-xe-rpc:delete>
	<ios-xe-rpc:app-hosting
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:app-hosting
	</ios-xe-rpc:app-hosting>
	<ios-xe-rpc:guestshell
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:guestshell
	</ios-xe-rpc:guestshell>
	<ios-xe-rpc:start
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:start
	</ios-xe-rpc:start>
	<ios-xe-rpc:stop
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:stop
	</ios-xe-rpc:stop>
	<ios-xe-rpc:hw-module
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:hw-module
	</ios-xe-rpc:hw-module>
	<ios-xe-rpc:debug
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:debug
	</ios-xe-rpc:debug>
	<ios-xe-rpc:monitor
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:monitor
	</ios-xe-rpc:monitor>
	<ios-xe-rpc:pnpa
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:pnpa
	</ios-xe-rpc:pnpa>
	<ios-xe-rpc:test
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:test
	</ios-xe-rpc:test>
	<ios-xe-ucse-rpc:ucse
		xmlns:ios-xe-ucse-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-ucse-rpc">/restconf/operations/Cisco-IOS-XE-ucse-rpc:ucse
	</ios-xe-ucse-rpc:ucse>
	<ios-xe-utd-rpc:utd
		xmlns:ios-xe-utd-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-utd-rpc">/restconf/operations/Cisco-IOS-XE-utd-rpc:utd
	</ios-xe-utd-rpc:utd>
	<bd:clear-bridge-domain
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:clear-bridge-domain
	</bd:clear-bridge-domain>
	<bd:clear-mac-address
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:clear-mac-address
	</bd:clear-mac-address>
	<bd:create-parameterized-bridge-domains
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:create-parameterized-bridge-domains
	</bd:create-parameterized-bridge-domains>
	<cisco-ia:sync-from
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:sync-from
	</cisco-ia:sync-from>
	<cisco-ia:save-config
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:save-config
	</cisco-ia:save-config>
	<cisco-ia:is-syncing
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:is-syncing
	</cisco-ia:is-syncing>
	<cisco-ia:checkpoint
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:checkpoint
	</cisco-ia:checkpoint>
	<cisco-ia:revert
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:revert
	</cisco-ia:revert>
	<cisco-ia:rollback
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:rollback
	</cisco-ia:rollback>
	<cisco-smart-license:register-id-token
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:register-id-token
	</cisco-smart-license:register-id-token>
	<cisco-smart-license:de-register
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:de-register
	</cisco-smart-license:de-register>
	<cisco-smart-license:renew-id
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:renew-id
	</cisco-smart-license:renew-id>
	<cisco-smart-license:renew-auth
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:renew-auth
	</cisco-smart-license:renew-auth>
	<notif-bis:establish-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:establish-subscription
	</notif-bis:establish-subscription>
	<notif-bis:create-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:create-subscription
	</notif-bis:create-subscription>
	<notif-bis:delete-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:delete-subscription
	</notif-bis:delete-subscription>
	<notif-bis:kill-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:kill-subscription
	</notif-bis:kill-subscription>
	<rt:fib-route
		xmlns:rt="urn:ietf:params:xml:ns:yang:ietf-routing">/restconf/operations/ietf-routing:fib-route
	</rt:fib-route>
</operations>

So the install module is there. Is there something specific I need to do to install the yang module? 

Hello,

 

I looked at the body code again. Try and remove the ',':

 

{
"Cisco-IOS-XE-install-rpc:input": {
"uuid": "test",
"one-shot": true,
"path": "bootflash:isr4400-universalk9.17.03.04a.SPA.bin", <-- remove the ',' (comma) at the end of this line
reloadfast": true
}
}

The comma is needed to separate the "reloadfast" property. I deleted a double quote in front of reloadfast when I was formatting the code. The orginal json body should have looked like this: 

 

{
    "Cisco-IOS-XE-install-rpc:input": {
        "uuid": "test",
        "one-shot": true,
	"path": "bootflash:isr4400-universalk9.17.02.01r.SPA.bin",
        "reloadfast": true
    }
}

I have tried without "one-shot" and without "one-shot" and "reloadfast". Everything I've tried just gives me a malformed message error

Hello,

 

sorry for the misunderstanding, what I meant was to run the code below, but I guess you have already tried that. I'll check further...

 

{
"Cisco-IOS-XE-install-rpc:input": {
"uuid": "test",
"one-shot": true,
"path": "bootflash:isr4400-universalk9.17.02.01r.SPA.bin"
}
}

Hello,

 

can you run the GET below ? That should render a list of available operations. I wonder if the 'install' is available at all in the 17.2 Amsterdam release...

 

GET https://<IP:Port>/restconf/operations/

Yeah, it's there. I posted the GET operations response a few post above. 

 

<operations
	xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf">
	<ios-xe-cell-rpc:cellular
		xmlns:ios-xe-cell-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-cellular-rpc">/restconf/operations/Cisco-IOS-XE-cellular-rpc:cellular
	</ios-xe-cell-rpc:cellular>
	<ios-xe-cts-rpc:cts
		xmlns:ios-xe-cts-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-cts-rpc">/restconf/operations/Cisco-IOS-XE-cts-rpc:cts
	</ios-xe-cts-rpc:cts>
	<install-ios-xe-rpc:install
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:install
	</install-ios-xe-rpc:install>
	<install-ios-xe-rpc:activate
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:activate
	</install-ios-xe-rpc:activate>
	<install-ios-xe-rpc:install-commit
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:install-commit
	</install-ios-xe-rpc:install-commit>
	<install-ios-xe-rpc:remove
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:remove
	</install-ios-xe-rpc:remove>
	<install-ios-xe-rpc:deactivate
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:deactivate
	</install-ios-xe-rpc:deactivate>
	<install-ios-xe-rpc:abort
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:abort
	</install-ios-xe-rpc:abort>
	<install-ios-xe-rpc:auto-abort-timer
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:auto-abort-timer
	</install-ios-xe-rpc:auto-abort-timer>
	<install-ios-xe-rpc:rollback
		xmlns:install-ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-install-rpc">/restconf/operations/Cisco-IOS-XE-install-rpc:rollback
	</install-ios-xe-rpc:rollback>
	<ios-xe-rpc:default
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:default
	</ios-xe-rpc:default>
	<ios-xe-rpc:clear
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:clear
	</ios-xe-rpc:clear>
	<ios-xe-rpc:crypto
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:crypto
	</ios-xe-rpc:crypto>
	<ios-xe-rpc:release
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:release
	</ios-xe-rpc:release>
	<ios-xe-rpc:reload
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:reload
	</ios-xe-rpc:reload>
	<ios-xe-rpc:factory-reset
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:factory-reset
	</ios-xe-rpc:factory-reset>
	<ios-xe-rpc:license
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:license
	</ios-xe-rpc:license>
	<ios-xe-rpc:service
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:service
	</ios-xe-rpc:service>
	<ios-xe-rpc:virtual-service
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:virtual-service
	</ios-xe-rpc:virtual-service>
	<ios-xe-rpc:copy
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:copy
	</ios-xe-rpc:copy>
	<ios-xe-rpc:delete
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:delete
	</ios-xe-rpc:delete>
	<ios-xe-rpc:app-hosting
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:app-hosting
	</ios-xe-rpc:app-hosting>
	<ios-xe-rpc:guestshell
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:guestshell
	</ios-xe-rpc:guestshell>
	<ios-xe-rpc:start
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:start
	</ios-xe-rpc:start>
	<ios-xe-rpc:stop
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:stop
	</ios-xe-rpc:stop>
	<ios-xe-rpc:hw-module
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:hw-module
	</ios-xe-rpc:hw-module>
	<ios-xe-rpc:debug
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:debug
	</ios-xe-rpc:debug>
	<ios-xe-rpc:monitor
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:monitor
	</ios-xe-rpc:monitor>
	<ios-xe-rpc:pnpa
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:pnpa
	</ios-xe-rpc:pnpa>
	<ios-xe-rpc:test
		xmlns:ios-xe-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-rpc">/restconf/operations/Cisco-IOS-XE-rpc:test
	</ios-xe-rpc:test>
	<ios-xe-ucse-rpc:ucse
		xmlns:ios-xe-ucse-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-ucse-rpc">/restconf/operations/Cisco-IOS-XE-ucse-rpc:ucse
	</ios-xe-ucse-rpc:ucse>
	<ios-xe-utd-rpc:utd
		xmlns:ios-xe-utd-rpc="http://cisco.com/ns/yang/Cisco-IOS-XE-utd-rpc">/restconf/operations/Cisco-IOS-XE-utd-rpc:utd
	</ios-xe-utd-rpc:utd>
	<bd:clear-bridge-domain
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:clear-bridge-domain
	</bd:clear-bridge-domain>
	<bd:clear-mac-address
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:clear-mac-address
	</bd:clear-mac-address>
	<bd:create-parameterized-bridge-domains
		xmlns:bd="urn:cisco:params:xml:ns:yang:cisco-bridge-domain">/restconf/operations/cisco-bridge-domain:create-parameterized-bridge-domains
	</bd:create-parameterized-bridge-domains>
	<cisco-ia:sync-from
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:sync-from
	</cisco-ia:sync-from>
	<cisco-ia:save-config
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:save-config
	</cisco-ia:save-config>
	<cisco-ia:is-syncing
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:is-syncing
	</cisco-ia:is-syncing>
	<cisco-ia:checkpoint
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:checkpoint
	</cisco-ia:checkpoint>
	<cisco-ia:revert
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:revert
	</cisco-ia:revert>
	<cisco-ia:rollback
		xmlns:cisco-ia="http://cisco.com/yang/cisco-ia">/restconf/operations/cisco-ia:rollback
	</cisco-ia:rollback>
	<cisco-smart-license:register-id-token
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:register-id-token
	</cisco-smart-license:register-id-token>
	<cisco-smart-license:de-register
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:de-register
	</cisco-smart-license:de-register>
	<cisco-smart-license:renew-id
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:renew-id
	</cisco-smart-license:renew-id>
	<cisco-smart-license:renew-auth
		xmlns:cisco-smart-license="http://cisco.com/ns/yang/cisco-smart-license">/restconf/operations/cisco-smart-license:renew-auth
	</cisco-smart-license:renew-auth>
	<notif-bis:establish-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:establish-subscription
	</notif-bis:establish-subscription>
	<notif-bis:create-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:create-subscription
	</notif-bis:create-subscription>
	<notif-bis:delete-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:delete-subscription
	</notif-bis:delete-subscription>
	<notif-bis:kill-subscription
		xmlns:notif-bis="urn:ietf:params:xml:ns:yang:ietf-event-notifications">/restconf/operations/ietf-event-notifications:kill-subscription
	</notif-bis:kill-subscription>
	<rt:fib-route
		xmlns:rt="urn:ietf:params:xml:ns:yang:ietf-routing">/restconf/operations/ietf-routing:fib-route
	</rt:fib-route>
</operations>

Hello,

 

I should have seen that in your initial post...my bad.

 

I am still looking at the syntax, but it looks perfectly ok. What client do you use to send the request ? Have you turned on debugging (debug restconf) ? That could render a clue...

Currently I am using Insomnia to test before trying to implement into our C# project. I have not turned on debugging, it's just adding "debug restconf" to the Cisco config?

Hello,

 

just type debug restconf at the exec prompt. Curious to know the results...

I am not getting any output. Will this work over SSH or do I need to be consoled in? 

Hello,

 

SSH should work, as long as you have access to the command prompt:

 

Nexus#debug restconf

 

Just make sure you have logging enabled. Can you post the output of 'show log' ?

Ok, I can see the logging by running "show log profile restconf". Thank you

 

ROuter000001#show log profile restconf
Displaying logs from the last 0 days, 0 hours, 10 minutes, 0 seconds
executing cmd on chassis local ...

2022/06/04 16:03:30.814378 {dmiauthd_R0-0}{1}: [errmsg] [13816]: (note): %DMI-5-AUTH_PASSED: User 'root' authenticated successfully fromIP_ADDRESS:0 and was authorized for rest over http. External groups: PRIV15
2022/06/04 16:03:30.821218 {nginx_R0-0}{1}: [ngx_core] [15990]: (note): [15995] [access_log]IP_ADDRESS - root [04/Jun/2022:16:03:30 +0000] "GET /restconf/operations HTTP/1.1" 200 8420 "-" "insomnia/2022.3.0"
2022/06/04 16:04:22.113604 {dmiauthd_R0-0}{1}: [errmsg] [13816]: (note): %DMI-5-AUTH_PASSED: User 'root' authenticated successfully fromIP_ADDRESS:0 and was authorized for rest over http. External groups: PRIV15
2022/06/04 16:04:22.169999 {nginx_R0-0}{1}: [ngx_core] [15990]: (note): [15995] [access_log]IP_ADDRESS - root [04/Jun/2022:16:04:22 +0000] "POST /restconf/operations/Cisco-IOS-XE-install-rpc:install HTTP/1.1" 400 253 "-" "insomnia/2022.3.0"
2022/06/04 16:06:54.695660 {dmiauthd_R0-0}{1}: [errmsg] [13816]: (note): %DMI-5-AUTH_PASSED: User 'root' authenticated successfully fromIP_ADDRESS:0 and was authorized for rest over http. External groups: PRIV15
2022/06/04 16:06:54.718553 {nginx_R0-0}{1}: [ngx_core] [15990]: (note): [15995] [access_log]IP_ADDRESS - root [04/Jun/2022:16:06:54 +0000] "POST /restconf/operations/Cisco-IOS-XE-install-rpc:install HTTP/1.1" 400 253 "-" "insomnia/2022.3.0"

Hello,

 

I am not really sure why it authenticates 'root', since you specified 'test' as the uuid. Is there a user root and/or test configured on the Nexus with privilege level 15 ?