RME 3.5 unable to discover cisco 7513 router

[rajaykumar_78]

Hi,

I installed cw with rme 3.5 and idu 11.0, problem is like this,with import file and manual adding of cisco 7513 router always showing not responding stauts, but my nnm server has detected with same snmp string.Even i tried with manage station to device option like ping, telnet, snmp, rme detects the device but not loading the device, if i run snmp with administration tools giving SNMPR failed, SNMPW failed, failed on port snmp_get port 161, snmp_set port 161, I am facing problem for only rme, but dfm was already detected with same string and showing community string with router attributes, pls help me.

[amritpatek]

The "Not Responding" state usually means that RME cannot poll to that device or is timing out.

Please try increasing the SNMP timeouts.

1. Go to RME>Admin>System Config>SNMP

2. Specify Fast SNMP Timeout as 60

3. Specify Slow SNMP Timeout as 90

4. Click on Apply