10-16-2008 07:00 AM
Hi,
I apologise for the basic question, but I am just strating to try and learn some Cisco.
I am setting up a 1700 series router. Everytime I reload the router it starts up again with none of my config (I have done "copy running-config startup-config). I do a show startup-config and all my changes are there. Why doesnt it work in running config?
Thanks in Advance
Solved! Go to Solution.
10-16-2008 07:09 AM
Check the value of your config-register in show version. It should be 0x2102. If it is, for example, 0x2142, that would explain why the router is ignoring NVRAM when it boots.
10-16-2008 07:09 AM
Check the value of your config-register in show version. It should be 0x2102. If it is, for example, 0x2142, that would explain why the router is ignoring NVRAM when it boots.
10-16-2008 07:13 AM
Hi, It shows as 0x142...
How do I change this..
Thanks
10-16-2008 07:14 AM
Sorted, changed it..
Thanks again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide