01-20-2019 11:11 AM
Hi! I am having issues with a new Router. I have the DHCP Configured on VLAN 1 for 192.168.1.100-3.254 and VLAN 2 10.1.1.10-254. Both of these VLANs can receive IPs, but only do so intermittently. Using dhcptest, a little windows tool, I get maybe a 50% resonse rate to DHCP Requests, and similar on all ipconfig /refresh requests. I get 100% ping resonse to the router and 150Mbits through, so I don't know why it isn't responding to requests. What is the best diagnostic data I can capture?
01-21-2019 12:36 AM
- Enable logging as per document-info below; make sure system-logs are enabled ; then look for dhcp requests during your test-times and check how they are handled and or if they are being responded too :
M.
01-22-2019 11:40 AM
01-22-2019 11:40 PM
- Look for current software version being installed, possibly upgrade to a more recent software release for the RV430 and try again.
M.
01-24-2019 01:36 PM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: