01-30-2014 06:37 AM
Is there and OID I can use to determine if a port is setup as an access or trunk port?
Thanks
Solved! Go to Solution.
01-30-2014 08:07 AM
Hi Jeff,
for the c6500 I use CISCO-STACK-MIB::vlanPortIslOperStatus
vlanPortIslOperStatus.13.43 = notTrunking
vlanPortIslOperStatus.13.44 = trunking
!
and for the Catatlyst 2k/3k CISCO-VTP-MIB::vlanTrunkPortDynamicStatus:
vlanTrunkPortDynamicStatus.1 = notTrunking
vlanTrunkPortDynamicStatus.50 = trunking
! ifIndex
Unfortunately I don't have any Nexus yet.
HTH
Rolf
01-30-2014 08:07 AM
Hi Jeff,
for the c6500 I use CISCO-STACK-MIB::vlanPortIslOperStatus
vlanPortIslOperStatus.13.43 = notTrunking
vlanPortIslOperStatus.13.44 = trunking
!
and for the Catatlyst 2k/3k CISCO-VTP-MIB::vlanTrunkPortDynamicStatus:
vlanTrunkPortDynamicStatus.1 = notTrunking
vlanTrunkPortDynamicStatus.50 = trunking
! ifIndex
Unfortunately I don't have any Nexus yet.
HTH
Rolf
01-31-2014 06:48 AM
Thanks these work great.
01-31-2014 07:40 AM
Thank you for the feedback!
Does one of this OIDs work for the Nexus too?
Thanks,
Rolf
02-12-2014 12:48 PM
The 3750 one did work for the Nexus. So to answer your question, yes.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide