SNMP Power Supply, Temperature, VLAN traffic OIDs for NX-OS

[BrentLeCornu1813]

I am looking for the OIDs for anything related to power supply status, temperature status, and VLAN traffic for the following devices/OS.

UCS-FI-M-6324 running NX-OS version 5.0

N9K-C9372PX running NX-OS version 7.0

I have spent a considerable amount of time on forums and trying to navigate Cisco's MIB locator and SNMP object navigator, but everything seems to rely on already knowing the OID or at least the correct subtree. I have tried several variations I found online with no success. Is it always this difficult or am I missing something?

I have an MIB browser, so if anyone could even give me the correct starting values for a SNMP walk, that would be helpful.

[balaji.bandi]

Not sure i am guiding correctly - last time i used it works for my snmpwalk

look at the below document, bottom of the page you see MIB

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide/sm_9snmp.html#concept_1D9C33CFAB6F45AFA755F439EDF746D0

[BrentLeCornu1813]

Thanks for the reply. Unfortunately, this still means I have to know in advance the name of the MIB associated to the service I want to monitor. Sometimes this is obvious but it requires searching the MIB files for matches to things like 'fan' or 'powersupply', often with no result or confusing results.