01-30-2014 06:19 AM
Hi
I want to understand this command snmp-server view and why we used this command and what the meanning of snmp-server view internet included ?
Regards
Ahmed
Solved! Go to Solution.
01-30-2014 08:34 PM
Hi Ahmed,
snmp-server view commands is used to restrict the polling of a particular MIB or OID using view.
snmp-server view internet included >> this mean that you are explicitly specifiying the Internet MIB
.
.
.
.
This is the Hiearachy of the MIB . ISO is the top in the hiearachy . If you add this in the view then rest is bydefault included.
Read the below link for more understanding of SNMP view. and why and how we use it.
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00800948e6.shtml#large_route
Thanks-
Afroz
[Do rate the useful post]
01-30-2014 08:34 PM
Hi Ahmed,
snmp-server view commands is used to restrict the polling of a particular MIB or OID using view.
snmp-server view internet included >> this mean that you are explicitly specifiying the Internet MIB
.
.
.
.
This is the Hiearachy of the MIB . ISO is the top in the hiearachy . If you add this in the view then rest is bydefault included.
Read the below link for more understanding of SNMP view. and why and how we use it.
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00800948e6.shtml#large_route
Thanks-
Afroz
[Do rate the useful post]
01-30-2014 11:51 PM
Hi AHMAD,
Thank you for your help
Regards
Ahmed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide