cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
335
Views
0
Helpful
0
Replies

SNMPv3 - create view no access

Hi all,

 

Im trying to upload some configuration via SNMPv3, of which i have researched and seen that I need to create to add write v1default to my group, I have done this as per the below

STR-LAB-01-RTR-01(config)#do sh run | i snmp
snmp-server group SNMP_SERVERS v3 auth write v1default
snmp-server group SNMP_SERVERS v3 priv
STR-LAB-01-RTR-01(config)#do show snmp user
User name: SNMP_RO
Engine ID: 80000009030000C88B976F20
storage-type: nonvolatile active
Authentication Protocol: SHA
Privacy Protocol: AES128
Group-name: SNMP_SERVERS

however, when I attempt to upload via snmpset, I get an access denied error

 

AW-MacBook-Pro:scp alex$ snmpset -v 3 -u SNMP_RO -l authPriv -a SHA -A *****' -x AES -X '*****' 172.18.10.85 1.3.6.1.4.1.9.9.96.1.1.1.1.6.336 s ssh-config
Error in packet.
Reason: noAccess
Failed object: SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.6.336

is this an issue with my OID, SNMP command or the config, if anyone is able to assist? 

 

Thanks

Alex

 

Everyone's tags (3)
CreatePlease to create content
Content for Community-Ad