cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
979
Views
0
Helpful
1
Replies

system MTU in MIB

ROMAN TOMASEK
Level 1
Level 1

The customer tried to use the following SNMP OID enterprises.9.9.276.1.2.1 on the Catalyst ME3400 with 12.2.44SE. From the SNMP object navigator this MIB exists in this IOS. But when the customer used the snmpwalk the following message appeared:

SNMPv2-SMI::enterprises.9.9.276.1.2.1 = No Such Instance currently exists at this OID.

Do you know if this OID is correct for system MTU on this platform??

1 Accepted Solution

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

This object is not supported. You can use the ifMtu object to get individual interface MTU values, but not a system-wide value.

View solution in original post

1 Reply 1

Joe Clarke
Cisco Employee
Cisco Employee

This object is not supported. You can use the ifMtu object to get individual interface MTU values, but not a system-wide value.