03-18-2015 05:45 AM
Hi!
I'm loading a network-confg file with ZTP that contains the following:
event manager applet LoadIOS
event timer countdown time 1
action 1 cli command "enable"
action 2 cli command "configure terminal"
action 3 cli command "file prompt quiet"
action 4 cli command "end"
action 5 cli command "copy tftp://192.168.101.3/load_ios.tcl bootflash:/load_ios.tcl"
action 6 cli command "tclsh bootflash:/load_ios.tcl"
exit
end
That is executing load_ios.tcl:
Solved! Go to Solution.
03-18-2015 10:18 PM
Change your applet's event line to:
event timer countdown time 1 maxrun 900
But you should have a read of https://supportforums.cisco.com/blog/12218591/automating-cisco-live-2014-san-francisco . I did something similar for Cisco Live US last year, and I feel that using a pure EEM solution offers better overall reliability.
03-18-2015 10:18 PM
Change your applet's event line to:
event timer countdown time 1 maxrun 900
But you should have a read of https://supportforums.cisco.com/blog/12218591/automating-cisco-live-2014-san-francisco . I did something similar for Cisco Live US last year, and I feel that using a pure EEM solution offers better overall reliability.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide