10-23-2009 11:15 AM
We were trying to use EEM 2.2 to monitor 4 BGP neighbors and if they all went down to remove eigrp from the configuration. Apparently this type of monitor is not available using EEM so it was suggested that TCL would be able to do this. Currently this would be for a 7200VXR running 12.4.24T1 but may need to be able to be ported to the ASR 1000 series if this makes any difference. Any assistance with this would be greatly appreciated.
Regards,
-Adam
10-27-2009 01:56 PM
10-27-2009 02:15 PM
We are not seeing any errors however the EIGRP removal doesn't appear to be called. I am attaching the term mon as I remove the peers as well as a more of the current file on flash.
unfortunately this is at a remote site and due to security I have to have the flash swapped to an inside router and I have no one available for tonight.
Please let me know if there is any other information or if there is something that we are doing wrong.
Again thanks!
10-27-2009 04:27 PM
10-28-2009 08:41 PM
10-28-2009 09:13 PM
Great thank you. I was out of the office today so I have not been able to test. I will test the new file in the morning and post the results.
Thanks again.
10-29-2009 06:15 AM
10-29-2009 07:16 AM
10-29-2009 09:12 AM
I think that works! I had couple of environment issues that I had to find on the rewriting of EIGRP. Let me do a little more test and I will let you know shortly.
Thank you so much for all the time you have put into this!
11-02-2009 05:33 AM
Success!I can't thank you enough for your time and patience, they are greatly appreciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide