cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1651
Views
0
Helpful
1
Replies

Topology OSPF ACLs Access Control Lists

iDAMedic
Level 1
Level 1

The file has the following settings

1. Settings.
Step 1. Configure the basic aspects of the devices: PC, router and switch.
Step 2. Configure OSPF routing on R1, ISP, and R3.
Step 3. Verify connectivity between devices.

2. Configure and verify numbered extended ACLs.

The company has a web server with the address: 209.165.200.254. The security policies are as follows:
Allow access to LAN hosts 192.168.30.0
Allow access to host 192.168.20.254
Deny access to LAN hosts 192.168.40.0.
Allow access to all people in the company.
3. Configure and verify numbered extended ACLs.
Match high-volume traffic and reject previously blocked traffic in the ACL. This approach ensures that packages are not compared to subsequent declarations.
Consolidate multiple permission and denial statements into a single statement using intervals.
Consider denying a particular group instead of allowing an opposite and larger group.

 

DCE Synchronization settings, as appropriate to the connected interface, at 128000 kb / s

Perform addressing and routing with the OSPF Protocol, with Autonomous System number: 20, and with Area Number: 0

Verify End-to-End Connectivity.
The security policies are as follows:

Allow access to LAN hosts 192.168.30.0

Allow access to host 192.168.20.254

Deny access to LAN hosts 192.168.40.0.

Allow access to all people in the company.

 

Thanks

1 Reply 1

iDAMedic
Level 1
Level 1

Hi, you already realize the topology, OSPF and ACLs Access Control Lists, but I do not have connection in all the computers, they can help me to check the error and the configuration, thanks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: