Uprade from Prime 3,9 to 3,10 some maps disappeared!

[Moudar]

Hi,

Prime 3,10 was installed in a new VM and then a backup from 3,9 was restored to 3,10.

Everything was fine, but after some time i started to see that some locations misses some maps (not all maps!)

as you can see here:

some floors map has disappeard!

these maps are there when looking att Prime 3,9!

Any suggestions!!

[marce1000]

 - Ref : https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-10/quick_start/guide/cisco_prime_infrastructure_3_10_quick_start_guide.html#task_1071048
                         Checkout Step 3

 M.

[Moudar]

Did tests with many new browsers but still miss some maps. 

[marce1000]

 - Make sure that the target machine has sufficient (free) disk space , (on all partitions)

 M.

[Moudar]

how to check that? What commands?

[Moudar]

I have now find this page which is useful:

https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/prime-infrastructure/200720-Prime-Infrastructure-Troubleshooting-L.html

[Georg Pauwen]

Hello,

interesting document indeed. Did that resolve your issue ?

[Moudar]

Not yet. My Prime shows this:

297G    /opt
31G     /opt/CSCOlumos
3.3G    /opt/CSCOlumos/apache-tomcat-9.0.74
3.3G    /opt/CSCOlumos/apache-tomcat-9.0.74/webapps
2.8G    /opt/CSCOlumos/apache-tomcat-9.0.74/webapps/webacs
1.9G    /opt/CSCOlumos/apache-tomcat-9.0.74/webapps/webacs/images
1.9G    /opt/CSCOlumos/apache-tomcat-9.0.74/webapps/webacs/images/domainmaps
1.2G    /opt/CSCOlumos/decap
1.2G    /opt/CSCOlumos/decap/data
1.2G    /opt/CSCOlumos/logs
64K     /opt/CSCOlumos/matlab/toolbox/matlab/imagesci/@H5G
3.0G    /opt/CSCOlumos/staging
1.9G    /opt/CSCOlumos/staging/app
18G     /opt/CSCOlumos/updates
1.9G    /opt/CSCOlumos/updates/PI_3_10_2_SystemPatch-1.0.5
1.9G    /opt/CSCOlumos/updates/PI_3_10_2_SystemPatch-1.0.5/pi3101_Oracle_Jan_patch
1.6G    /opt/CSCOlumos/updates/PI_3_10_4-1.0.24
2.0G    /opt/CSCOlumos/updates/PI_3_10_4_SystemPatch-1.0.12
2.0G    /opt/CSCOlumos/updates/PI_3_10_4_SystemPatch-1.0.12/pi3104_Oracle_Jan_patch
265G    /opt/oracle
258G    /opt/oracle/base
6.3G    /opt/oracle/base/fast_recovery_area
3.3G    /opt/oracle/base/fast_recovery_area/STBYWCS
3.2G    /opt/oracle/base/fast_recovery_area/STBYWCS/onlinelog
3.1G    /opt/oracle/base/fast_recovery_area/WCS
3.1G    /opt/oracle/base/fast_recovery_area/WCS/onlinelog
239G    /opt/oracle/base/oradata
6.7G    /opt/oracle/base/oradata/STBYWCS
3.5G    /opt/oracle/base/oradata/STBYWCS/datafile
3.2G    /opt/oracle/base/oradata/STBYWCS/onlinelog
232G    /opt/oracle/base/oradata/WCS
231G    /opt/oracle/base/oradata/WCS/datafile
1.1G    /opt/oracle/base/oradata/WCS/onlinelog
13G     /opt/oracle/base/product
13G     /opt/oracle/base/product/19.3.0
13G     /opt/oracle/base/product/19.3.0/dbhome_1
5.1G    /opt/oracle/base/product/19.3.0/dbhome_1/.patch_storage
2.3G    /opt/oracle/base/product/19.3.0/dbhome_1/lib
1.1G    /opt/oracle/base/product/19.3.0/dbhome_1/sqlpatch

According to that guide:

"

1. Compare the /opt directory size and  /opt/oracle size, if the /opt/oracle directory's size is more then 60-70% of the /opt directory, consider adding the more disk space to the VM (if the virtual appliance) or hard-drive upgrade in case of physical appliance. 

"

In my case /opt/oracle size is more than 60-70% of /opt. The question is how to extend the disk??

I have found this, but I still dont know where to start!

https://community.cisco.com/t5/wireless-mobility-knowledge-base/low-disk-space-message-in-cisco-prime-infrastructure/ta-p/3134215#:~:text=In%20installations%20with%20a%20virtual,power%20the%20VM%20back%20on.